The GRACO 205 Air Motor for Metering (Part No. 240899) is an air-operated component designed for use in GRACO metering systems. It is typically constructed from durable materials such as acetal, polypropylene, or PVDF, and is engineered to provide reliable air-driven operation for fluid transfer and metering applications within GRACO equipment.

Key Features:

• Air motor for metering
• Husky 205
• Acetal, polypropylene, or PVDF (depending on variant)
• Maximum fluid working pressure: 100 psi (7 bar, 0.7 MPa); Air pressure operating range: 20 to 100 psi (1.4 to 7 bar, 0.14 to 0.7 MPa)
• Compatible with GRACO Husky 205 series pumps and metering systems
• Reliable air-driven operation
• Low noise (typical sound level at 70 psi: 70 dBA)
• Maximum air consumption: 9.0 scfm (0.252 m³/min)
• Durable diaphragm construction
• Suitable for a wide range of industrial applications

Applications:
Used in fluid transfer and metering systems for industrial lubrication, maintenance, and process applications. Suitable for use in environments requiring reliable, air-powered fluid handling.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, reliability, and safety of the metering system.
• Ensure proper air supply within the specified pressure range (20 to 100 psi)
• Use recommended air line filters and mufflers for optimal performance and noise reduction
• Install a bleed-type master air valve as required for the pump
• Connect ground wire for safety
• Follow manufacturer’s instructions for fluid inlet/outlet connections and maintenance
• Regularly inspect air lines and connections for leaks
• Maintain clean air supply to prevent contamination
• Check diaphragm and seals for wear and replace as needed
• Refer to the equipment manual for detailed installation and maintenance procedures