The GRACO MVP-150 Vapor Pump Head Replacement is a critical component designed for use in GRACO vapor recovery systems, specifically as a replacement for the 1050E series. It is constructed with a process pressure section and reed valves made of stainless steel, and features PTFE (standard) or optional FKM fluoroelastomer diaphragms. Its primary function is to recover and re-condense LP-Gas vapors, ensuring safe and efficient operation within GRACO equipment.

Key Features:

• Vapor Recovery Pump Head
• MVP-150
• Stainless steel process pressure section and reed valves; PTFE (standard) or FKM fluoroelastomer (optional) diaphragms
• LP-Gas vapor recovery rate: 6 cfm (0.17 m³/min); Butane recovery rate: 1.5 lb/min (0.68 kg/min); Propane recovery rate: 2 lb/min (0.9 kg/min)
• Maximum pumping outlet pressure: 150 psi (1.03 MPa, 10.3 bar); Maximum pumping inlet vacuum: 27 inHg (9.3 kPa, 93 mbar); Equipment withstand pressure: 375 psi (2.59 MPa, 25.9 bar)
• Designed as a replacement for GRACO 1050E series vapor recovery systems
• Driven by CO₂ gas charge for reliable operation
• Designed for ease of maintenance and replacement
• Robust construction for long service life
• Operates within a wide temperature range (PTFE: +4° to 104°C; FKM: -40° to 135°C)

Applications:
Used in LP-Gas vapor recovery and re-condensation systems, suitable for industrial, agricultural, and commercial applications where safe handling of flammable vapors is required.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, safety, and compatibility with existing equipment.
• Ensure CO₂ supply is properly connected and set to 150 psi for correct operation
• Check for worn or damaged valves and replace as necessary
• Follow manufacturer guidelines for installation and maintenance to prevent air ingress and ensure system integrity
• Regularly inspect diaphragms and valves for wear
• Maintain proper CO₂ pressure and check for leaks
• Use only recommended materials and replacement parts