The Husky 716 AL is an air-operated double diaphragm metal pump constructed from aluminum, designed for the safe and efficient transfer of fluids in industrial environments. It is intended for use within GRACO equipment to evacuate and transfer a wide range of fluids, including those with small solids, in demanding applications.

Key Features:

• Air-operated double diaphragm pump
• Husky 716 AL, 3/4 in (19.05 mm) porting
• Aluminum
• Maximum free flow delivery: 16 gpm (61 lpm)
• Maximum fluid working pressure: 100 psi (7 bar, 0.7 MPa); Air pressure operating range: 30–100 psi (2.1–7 bar, 0.21–0.7 MPa)
• Compatible with a wide range of fluids and small solids up to 0.09 in (2.5 mm); consult engineering guides for chemical compatibility
• ATEX II 2 GD Ex h IIC 66°C...135°C Gb Ex h IIIC T135°C Db (dependent on fluid temperature and materials)
• Center- and end-porting options
• No mechanical seals to leak or fail
• Runs quietly at less than 85 dBa with remote muffler capability
• Easy-to-service air valve and ball checks
• External controller for remote control capabilities
• Maximum suction lift: 15 ft (4.5 m) dry
• Maximum ambient operating temperature: 180°F (82°C)
• Maximum pump speed: 400 cpm
• Maximum air consumption: 28 scfm (0.672 m³/min)

Applications:
Used for evacuating and transferring fluids in industrial, mining, agricultural, and manufacturing environments. Suitable for handling fluids with small solids and for applications requiring reliable, leak-free operation.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, safety, and longevity of the equipment.
• Install air line accessories as shown in the manual, ensuring the air line is electrically conductive.
• Control fluid pressure using an air regulator on the air side or a fluid regulator near the pump outlet.
• Locate a bleed-type master air valve close to the pump to relieve trapped air.
• Isolate air line accessories with a master air valve upstream during cleaning and repair.
• Mount accessories on a wall or bracket for stability and safety.
• Regularly inspect and service air valve and ball checks for optimal performance.
• Consult engineering guides for chemical compatibility and temperature limits.
• Follow all safety instructions and warnings in the manual.