info@innoflo.com
1-780-944-4818Parts shop
Optimize fluid management and handling.
Innoflo Solutions Inc. offers a comprehensive Lube & Fuel Island Module designed to optimize fluid management and handling for industrial operations. This system integrates a variety of components to ensure efficient, safe, and reliable lubricant and fuel distribution.
The lubricant system features stainless steel tanks equipped with air-breather filters and tank level monitors, offering capacities from 1,000 to 4,000 L (264 to 1,056 gal). Graco hydraulic pumps provide flow rates of 45 LPM (12 GPM), while ISO 16/13 filtration ensures clean oil delivery.
For grease management, a replaceable top tote (1,000–1,600 L / 264–422 gal) gravity-feeds into a permanent bottom tank. This setup includes Graco hydraulic pumps, high-pressure pumps (5,000 psi), and bulk transfer pumps, all delivering flow rates of 45 LPM (12 GPM).
The module is housed in a pre-engineered and fabricated building that is both heated and insulated. Key features include:
· Sub-floor spill tray and sump with alarms for safety.
· Floor grating and ventilation controlled by a PLC.
· OH&S platforms for safe access and egress.
· The building is supported on triple 16” I-beam skids.
The bulk fill panel allows for efficient bulk filling of lubricants and coolant, with used oil evacuation capabilities. Fluid-specific receivers prevent cross-contamination, and tank levels are displayed at the fill point. Normally closed overfill valves and stainless steel piping ensure secure operation.
The refueling system is designed for safe and efficient handling of heavy equipment. Key features include:
· Loading arms that keep hoses and nozzles clean and off the ground, facilitating refueling at rates up to 1,500 LPM (400 GPM).
· Grounding cables for safety.
· The system includes fuel meters, solenoids, and dual systems for simultaneous dispensing, with flow rates ranging from 500–1,500 LPM (130–400 GPM).
Fuel is supplied from remote tanks, pumps, and filters to minimize the footprint and keep delivery tankers away from heavy haul equipment. The hose reel assembly typically supports four oils, coolant, high-pressure grease, bulk grease, used oil evacuation, and DEF, with 23 m (75 ft) spring-rewind hose reels.
· Flip-down access doors with drip trays allow for simultaneous access on both sides, enhancing efficiency.
· Automatic depressurization of couplers after use, along with fluid-specific couplers, prevent filling errors.
· Flip-down access doors with drip trays allow for simultaneous access on both sides, enhancing efficiency.
· Automatic depressurization of couplers after use, along with fluid-specific couplers, prevent filling errors.
Do you have a business question or are you curious about the possibilities?
