The GRACO 24G603 is a high-pressure grease pump designed for use with 120 lb (55 kg) pails. It is constructed from steel, brass, nitrile rubber, polyurethane, UHMWPE, and acetal, and is intended for reliable, high-volume grease transfer in industrial lubrication systems.

Key Features:

• Grease pump
• 24G603, 120 lb (55 kg) pail
• Steel, brass, nitrile rubber, polyurethane, UHMWPE, acetal
• Max air pressure: 150 psi (1.03 MPa, 10.3 bar); Max fluid pressure: 7,500 psi (51.7 MPa, 517 bar)
• Designed for use with 120 lb (55 kg) pails, NPT inlet/outlet
• 50:1 pressure ratio for high-pressure grease transfer
• Built-in inlet strainer (oil only) to protect pump from contaminants
• Reliable and robust construction for industrial environments
• Easy maintenance with accessible components
• Designed for wall-mount applications with GRACO suction tubes

Applications:
Industrial lubrication systems, high-volume grease transfer, mining, agriculture, and other heavy-duty environments requiring reliable grease dispensing.

Installation Notes:

• Using genuine GRACO parts ensures compatibility, reliability, and safety. Non-genuine parts may compromise performance and void warranties.
• Always use GRACO-designed suction tubes with a built-in relief device for wall-mount applications
• Use an inlet screen to prevent debris from plugging relief passages
• Periodically inspect the inlet screen for plugging, especially when changing containers
• Ensure all connections are secure and use appropriate thread sealant for NPT fittings
• Do not operate the pump without an inlet screen
• Regularly inspect and clean the inlet screen
• Check for oil leakage through air exhausts and replace throat seal (u-cup) if necessary
• Clear any clogs in fluid lines, hoses, or valves as needed