The GRACO 25A217 is a professional-grade stucco applicator designed for use with ToughTek® pumps and systems. It is constructed for durability and is intended for applying water-based stucco base coats, finish coats, and Exterior Insulation and Finish Systems (EIFS). The part features a cam fitting for secure hose attachment and is made to withstand demanding construction environments.

Key Features:

• Pole spray applicator
• 25A217, Series C; 6" long with 35 mm female mortar coupling
• Maximum fluid working pressure: 600 psi (4.13 MPa, 41.3 bar); Maximum air pressure: 100 psi (0.69 MPa, 6.9 bar)
• Compatible with ToughTek® pumps and systems for stucco and EIFS applications
• Cam and groove inlet fitting for secure hose attachment
• Designed for professional use in construction environments
• Not approved for use in explosive atmospheres or hazardous locations
• Ease of maintenance: Rubber gasket and nozzle retainer should be hand-cleaned and dried after each use

Applications:
Used for applying water-based stucco base coats, finish coats, and Exterior Insulation and Finish Systems (EIFS) in professional construction settings.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, reliability, and safety with GRACO equipment.
• Ensure the rubber retainer is fully seated by turning it back and forth during installation
• Hand-clean and dry the rubber gasket in the cam and groove inlet fitting and the rubber nozzle retainer after each use
• Follow all safety instructions and warnings provided in the equipment manual
• Regularly inspect and clean the applicator after use
• Check for wear and replace parts as needed to maintain performance and safety