The GRACO 95G105 is a robust, automatic grease lubrication pump designed for demanding industrial environments. It features a 4-liter reservoir, operates on 24 VDC, and is equipped with a low-level controller and a vertical oriented 5-pin CPC connector. The pump is constructed for reliability and is intended for use in automatic lubrication systems, particularly in harsh conditions such as hydraulic fracturing (fracking) and pumpjack lubrication.

Key Features:

• Automatic grease lubrication pump
• G5™ Pro, 4 liter reservoir
• UV-resistant, high-impact reservoir; robust pump elements
• Adjustable output per element per minute: 0.155 in³ (2.54 cm³) [no shim], 0.104 in³ (1.70 cm³) [1 shim], 0.055 in³ (0.90 cm³) [2 shims]
• Maximum pressure: 4,250 psi (293 bar)
• Compatible with NLGI #000–#2 greases; designed for use with automatic lubrication systems
• Five adjustable pump elements for versatile operation
• Low-level controller for automated operation
• Vertical oriented 5-pin CPC connector for easy installation
• Optional auto-fill shutoff (AFSO) and pressure relief valves (PRV) available in larger enclosures
• Reservoir wiper arm to prevent material separation
• Maximum run time: 30 minutes
• Operating temperature: -40°F to 158°F (-40°C to 70°C), depending on lubricant
• Robust construction for harsh environments

Applications:
Designed for automatic lubrication of industrial equipment, especially in hydraulic fracturing (fracking) and pumpjack operations. Suitable for use in mining, oil and gas, agriculture, and other heavy-duty industries where reliable, automated lubrication is required.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, reliability, and compatibility with existing systems.
• Ensure the pump is installed according to GRACO guidelines and local regulations.
• Use only recommended NLGI #000–#2 greases appropriate for the application and temperature.
• Do not overfill the reservoir.
• Do not operate the pump without a reservoir attached.
• For higher viscosity fluids, start the pump to rotate the stirring paddle during filling to prevent air pockets.
• Do not exceed a 30-minute run time.
• For models using an external controller, follow the manufacturer’s instructions for wiring and setup.
• Regularly inspect the pump and reservoir for leaks or damage.
• Keep the reservoir clean and free from contaminants.
• Monitor lubricant levels and refill as needed.
• Check and adjust pump output as required for optimal lubrication.