The GRACO 95G106 G5 Pro Grease Lubrication Pump is a robust, automatic lubrication pump designed for demanding industrial environments. It features a 4-liter, UV-resistant, high-impact reservoir and is constructed for reliable, long-term use. This pump is intended for automatic dispensing of NLGI #000 to #2 greases and oils with at least 40cSt viscosity, making it suitable for heavy-duty applications such as hydraulic fracturing (fracking) and other industrial lubrication needs.

Key Features:

• Automatic grease/oil lubrication pump
• G5 Pro, 4 Liter reservoir
• UV-resistant, high-impact reservoir; robust pump elements
• Adjustable per pump element: 0.055–0.155 in³/min (0.90–2.54 cm³/min) depending on shim configuration
• Maximum pressure: 4,250 psi (293 bar)
• Compatible with NLGI #000 to #2 greases and oils (minimum 40cSt viscosity)
• Five adjustable pump elements for versatile lubrication
• Remote manual run capability
• Vertical oriented 5-pin CPC connector
• Optional auto-fill shutoff (AFSO) and pressure relief valves (PRV) available
• Stirring paddle with wiper arm to prevent material separation
• Designed for harsh environments and demanding applications
• Easy installation and maintenance
• Maximum run time: 30 minutes

Applications:
Primarily used in hydraulic fracturing (fracking) operations and other industrial settings requiring reliable, automatic lubrication of equipment with NLGI #000 to #2 greases and oils.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, reliability, and compatibility with existing systems.
• Ensure the pump is installed in a vertical orientation as specified
• Connect using the 5-pin CPC connector for proper electrical integration
• Do not operate the pump without the reservoir attached
• Use only recommended NLGI #000 to #2 greases and oils (minimum 40cSt viscosity)
• Fill the reservoir using a hand-operated, pneumatic, or electric transfer pump; do not overfill
• For higher viscosity fluids, start the pump during filling to rotate the stirring paddle and prevent air pockets
• Do not exceed the 30-minute maximum run time
• Consult the equipment manual for detailed installation and maintenance procedures