The GRACO 96G203 is a compact, automatic grease lubrication pump designed for professional use in industrial and vehicle service applications. It is constructed for durability and reliability, intended to dispense NLGI Grades #000 to #2 greases and oils with at least 40cSt viscosity. The pump is engineered to extend machinery life, reduce operating costs, and increase productivity by providing consistent, automated lubrication to critical components.

Key Features:

• Automatic grease lubrication pump
• G3 Pro, 2 Liter reservoir
• Robust, professional-grade materials
• Pump Output Pressure: 5100 psi (35.1 MPa, 351.6 bar); Fill Inlet Pressure: 5000 psi (34.4 MPa, 344.7 bar) (Note: These values are from the G3 Pro series manual and may be representative for this model; confirm with GRACO for exact 96G203 specs if critical)[2][5]
• NLGI Grades #000 to #2 greases and oils with at least 40cSt viscosity
• Conforms to ANSI/UL 73; Certified to CAN/CSA C22.2 No 68-09 (Note: Confirm for exact model if required)[2][5]
• Built-in controller with selectable pump on/off timer
• Low level indicator with warning and shut-down alarm
• Manual run initiates lube cycle on-demand (remote option available)
• Password protection for settings
• Pre-lube function for cycle initiation on start-up
• Flexible design for series progressive systems
• Easy to maintain and reliable for continuous duty

Applications:
Ideal for use in industrial machinery, vehicle service, mining, agriculture, and other sectors requiring automated, reliable grease lubrication to protect and extend equipment life.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, reliability, and safety. Non-genuine parts may compromise system integrity and void warranties.
• Follow all safety instructions and warnings in the manual
• Ensure only compatible greases and oils are used
• Do not overfill the reservoir
• Do not operate the pump without the reservoir attached
• Monitor the system during filling to prevent overfilling
• Consult the manual for wiring and controller setup
• Regularly check for leaks and proper function
• Regularly inspect and clean the pump and reservoir
• Replace worn or damaged parts with genuine GRACO components
• Monitor grease levels and refill as needed
• Check for proper operation of the low level indicator and alarms
• Keep firmware and controller settings up to date