Product overview

One Module. Every Service Fluid Your Fleet Needs.

Routine heavy-equipment service is slowed by fluids that live in different places: drums in one bay, coolant in another, grease wherever it was last left, and no clean way to evacuate used oil.

The LI2300 is Innoflo's modular lube island, delivering eight integrated fluid-service circuits from a 44-foot skid-mounted seacan platform. The standard configuration supports four fresh oils, fresh coolant, bulk grease, high-pressure grease and used-oil evacuation, with an optional DEF dispense point. Fresh-oil circuits include 5 µm nominal filtration, and fresh oils and coolant dispense at a high-flow 50 L/min (13.2 GPM) that holds on both hoses at once, so two machines are serviced at the same time instead of one waiting on the other. An integrated 25 HP hydraulic power unit drives dispensing across the rack, so no customer-supplied HPU and no compressed air are required.

Purpose-built for open-pit mine sites and heavy commercial maintenance facilities, the LI2300 combines high-capacity stationary fluid storage, full-floor spill containment and cold-climate performance in one standardized module. It arrives as a complete Innoflo-designed system for simpler specification, faster deployment, and end-to-end installation and service.

Inside the Lube Island

8 integrated service circuits Four fresh oils, coolant, bulk grease, HP grease and used-oil evacuation
50 L/min [13.2 GPM] High-flow oil and coolant dispense, held on both hoses so two machines are serviced at once
5 µm nominal Filtration on every fresh-oil circuit, so clean oil goes into components
−50 to 38 °C Rated for continuous operation (−58 to 100 °F)
LI2300 / MOD-LI2300

Eight-service fluid management. One mine-ready module.

Centralize the fluids and equipment required for routine heavy-equipment service in a standardized module engineered for uptime, fluid quality and all-season operation.

3D rendering of the two Innoflo LI2300 module containers, showing the exterior access doors, control panel and ventilation louvres
3D rendering of the LI2300 module's internal layout, showing stationary storage tanks, filtration racks, hose reels and the hydraulic power unit

LI2300

Every service fluid, organized at one dispensing rack.

Four fresh-oil circuits, fresh coolant, bulk grease, high-pressure grease and used-oil evacuation are brought together at an exterior dispense bulkhead on the hose-reel rack. Oils and coolant dispense at a high-flow 50 L/min (13.2 GPM) that holds on both hoses at once, supported by high-capacity stationary storage and an integrated 25 HP hydraulic power unit inside the module.

8 circuits
Four fresh oils, fresh coolant, bulk grease, HP grease and used-oil evacuation, with an optional DEF dispense point on the rack.
50 L/min [13.2 GPM]
High-flow dispense on fresh oils and coolant, held on both hoses at once so one bay never waits on the other.
Approx. 3,000 L
Stationary storage per oil and coolant circuit, plus a replaceable bulk-grease tote of approx. 1,700 L.
5 µm nominal
Filtration on the fresh-oil circuits, rated 6.3 µm at 99.9% (β6.3 > 1000).
−50 to 38 °C
Rated for continuous operation, with an exterior dispense bulkhead that helps retain enclosure heat in winter.
ROI BUILT IN

Where the LI2300 creates value.

Four ways a centralized lube island changes how a site runs. The full engineering detail is in the product sheet.

01 / 04
Service Productivity

One stop for every routine service fluid.

Eight circuits meet at a single dispensing rack, so a machine is serviced in one place instead of being walked between scattered fluid points.

A row of labelled dispense cabinets running the length of an Innoflo lube island, with the control panel at the near end
YOUR GROWTH PATH

Configure the island around the work it has to do.

The eight standard circuits cover routine heavy-equipment service. These options are specified with the module rather than retrofitted around it.

  1. 01Add Intelligence

    VERIDAPT AdaptMAC dispense terminal with card reader, showing dispense, batch, volumes and deliver options

    Dispense Metering and VERIDAPT AdaptFMS

    Meter what leaves each circuit and connect the module to AdaptFMS, turning fluid dispensing into consumption data by asset rather than a number written on a clipboard.

    When you want the island to report to you.

  2. 02Add a Circuit

    Hose reels behind a stainless guard on a lube island dispense bay, with room on the rack for a further dispense point

    Optional DEF Dispense Point

    Add a DEF dispense point to the hose-reel rack in addition to the eight standard circuits, so DEF is served from the same island as every other service fluid.

    Configured as a dispense point on the LI2300 rack. Final configuration is settled during engineering.

    When your Tier IV fleet is served from this island.

Part of I-Grid Modular Infrastructure

The Lube Island is one piece of a connected mine-site system.

Pair fluid service with modular fuel and DEF infrastructure designed around your site.

Explore I-Grid
LI2300

Ready to centralize fluid service?

Tell us about your fleet, your service bays and your site conditions. We will help configure an LI2300 Lube Island around your operation.

Talk to a Lube Island Specialist Download Product Sheet
Allan Fitze Allan FitzeBusiness Development Manager
780-267-4265
allan.fitze@innoflo.com
LI2300

Frequently Asked Questions

What is the Innoflo LI2300 Lube Island?

The LI2300 is Innoflo's modular lube island, delivering eight integrated fluid-service circuits from a 44-foot skid-mounted seacan platform. The standard configuration supports four fresh oils, fresh coolant, bulk grease, high-pressure grease and used-oil evacuation, with an optional DEF dispense point.

Which fluids can the LI2300 dispense?

Eight standard circuits cover four fresh oils, fresh coolant, bulk grease, high-pressure grease and used-oil evacuation. A DEF dispense point can be added to the hose-reel rack in addition to the eight standard circuits.

What are the LI2300 flow rates and working pressures?

Fresh oils and fresh coolant dispense at 50 L/min (13.2 GPM), and that flow holds on both hoses at once so two machines can be serviced at the same time. Bulk grease runs at 45 L/min (11.9 GPM) and high-pressure grease at 1.8 kg/min (4 lb/min). Used-oil evacuation runs up to 250 L/min (66 GPM), varying with tank location and site configuration. Maximum working pressure is 34,474 kPa (5,000 PSI) on the HP grease circuit and lower on all other circuits.

Does the LI2300 operate in extreme cold?

Yes. The module is rated for continuous operation from −50 °C to 38 °C (−58 to 100 °F). Dispensing happens at an exterior bulkhead on the hose-reel rack, which helps retain enclosure heat in winter.

What site power and utilities does the LI2300 require?

The module takes a 600 VAC site connection, with amperage, phase and frequency confirmed at order. A 25 HP hydraulic power unit is integrated into the module, so no customer-supplied HPU is required, and no compressed air is used in the LI2300 design.

How is fluid quality and spill containment handled?

Fresh-oil circuits include 5 µm nominal filtration, rated 6.3 µm at 99.9% (β6.3 > 1000). Filtration specifications apply to the fresh-oil circuits only. The full seacan floor is a drip pan for spill containment, and the working surface is non-slip grating for safer access.