The GRACO SDM5 Series Electronic Manual Oil Meter is a robust, electronic metering device designed for accurate dispensing of oils and antifreeze/water mixtures. Constructed from durable materials including aluminum, stainless steel, PBT/PC, nitrile rubber, and zinc, it is engineered for professional use in demanding environments such as automotive dealerships, fleets, mining, construction, and industrial applications. The flexible extension and 1/2" BSPP fitting enhance installation versatility.

Key Features:

• Electronic manual dispense meter
• SDM5 Series
• Aluminum, stainless steel, PBT/PC, nitrile rubber, zinc
• 0.1–5 gpm (0.4–19 lpm)
• Maximum working pressure: 1500 psi (103.4 bar)
• Designed for oils and 50:50 antifreeze/water mix fluids; not approved for use in European explosive atmosphere locations
• High accuracy (±0.5%)
• Long battery life (up to one year with AA batteries)
• Maximum totalizer: 999,999 gallons or liters
• Units of measure: quarts, pints, gallons, liters (factory set to quarts)
• Swivel inlet: 1/2"-14 NPT (female) or BSPP as specified
• Outlet: 3/4"-16 straight thread O-ring Boss
• Operating temperature: 4–158°F (-20–70°C)
• Storage temperature: -40–158°F (-40–70°C)
• Trigger lock for safety
• Engineered for reliability and ease of maintenance

Applications:
Ideal for metered oil and fluid dispensing in car/truck dealerships, fleets, mining, off-road, public works garages, construction, and higher volume in-plant applications.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, reliability, and warranty coverage.
• Ensure proper alignment and tightening of fittings during installation.
• Do not use PTFE tape or thread sealant on extension tube threads to prevent leaks.
• Allow sealant to cure as per manufacturer recommendations before circulating fluid.
• Regularly check for leaks and ensure proper battery maintenance for electronic components.
• Periodically recalibrate the meter for accuracy.
• Use recommended battery types (AA alkaline or lithium).
• Inspect wetted materials for wear and replace as needed.
• Follow manufacturer’s instructions for cleaning and storage.