The GRACO 24H125 Sdp5 Series Electronic Preset Anti-Freeze Meter is a professional-grade, electronic preset meter designed for accurate dispensing of anti-freeze and petroleum-based lubricants. It features a flexible extension and a 1/2" BSPT inlet. The construction includes materials such as aluminum, stainless steel, PBT/PC, nitrile rubber, and carbon steel, ensuring durability and chemical resistance. This part is intended for use within GRACO dispensing systems to ensure precise, repeatable fluid delivery in demanding environments.

Key Features:

• Electronic Preset Meter
• Sdp5 Series, 24H125
• Aluminum, stainless steel, PBT/PC, nitrile rubber, carbon steel
• Up to 19 LPM (liters per minute) or less (specific to Sdp5; 24H125 may vary, but Sdp5 is generally ≤19 LPM)
• Maximum working pressure: 1500 psi (10 MPa, 103 bar) for oils; 900 psi (6.2 MPa, 62 bar) for 50:50 antifreeze/water mix
• Designed for use with petroleum-based lubricants and 50:50 antifreeze/water mix; not for windshield washer solvent
• Not approved for use in European explosive atmosphere locations
• Flexible extension included
• Electronic preset for accurate, repeatable dispensing
• Long battery life (alkaline or lithium AA)
• Trigger lock for safety
• Maximum totalizer: 999,999 gallons or liters
• Maximum recorded dispense: 999.99 units
• Accuracy: ±0.5% (after calibration)
• Out-of-box accuracy: ±1.25%
• Five-year overall warranty, three-year electronics warranty
• Engineered for performance, innovation, and reliability

Applications:
Professional dispensing of anti-freeze and petroleum-based lubricants in industrial, mining, agricultural, and maintenance environments. Suitable for use in GRACO dispensing systems where precise, repeatable fluid delivery is required.

Installation Notes:

• Using genuine GRACO parts ensures compatibility, reliability, and optimal performance of the dispensing system. Non-genuine parts may compromise safety and accuracy.
• Ensure all connections are secure and properly aligned before use
• Do not use PTFE tape or thread sealant on the extension tube threads, as this may cause leaks
• Allow sealant to cure according to manufacturer recommendations before circulating fluid
• Align extension with meter housing and handle, then firmly tighten the nut
• Regularly check for leaks and recalibrate as needed for optimal accuracy
• Regularly inspect for wear and leaks
• Recalibrate periodically to maintain accuracy
• Use recommended batteries for optimal performance
• Follow all safety instructions in the manual