The GRACO 24P314 is a wiring harness designed for use with GLC 2200 series controllers. It is a cable harness with flying leads, intended to interface the GLC 2200 Lubrication Controller with pumps and pump accessories. The harness is constructed for professional use in industrial environments, specifically for in-plant machinery and off-road equipment. Material is not specified, but it is a standard industrial cable harness.

Key Features:

• Cable Harness
• GLC 2200 Series, 150 cm (5 ft.)
• Flying leads, standard industrial cable
• GLC 2200 Series Controllers
• Ease of installation with flying leads
• Rated IP65 for dust and water resistance
• Reliable interface for controller-to-pump connections

Applications:
In-plant machinery, off-road equipment, and other industrial applications requiring reliable lubrication system control.

Installation Notes:

• Using genuine GRACO parts ensures compatibility, reliability, and optimal performance of the lubrication system.
• Verify the connector end of the cable is NOT plugged into the GLC 2200 controller before starting installation.
• Remove 2 to 3 inches of outer insulation from the bare end of the cable.
• Strip each wire as instructed.
• Connect components to cable wires using the Wiring Key Table, matching wire colors to related components.
• Ensure all negative and positive wire colors are correctly assigned.
• Plug the connector into the GLC 2200 unit, matching pin numbers to the Connector Identification Label.
• The connector can only be plugged in one way; the clip should be facing down when correctly oriented.