The GRACO Husky 1050 is an air-operated double diaphragm pump with an aluminum center section, stainless steel seats and balls, and a PTFE overmolded diaphragm. It is designed for industrial fluid transfer applications, including handling water, antifreeze, detergents, motor oil, hydraulic fluid, and cutting oil.

Key Features:

• Pneumatic (air-operated) double diaphragm pump
• Husky 1050, 1" NPT
• Aluminum center section, stainless steel seats and balls, PTFE overmolded diaphragm
• 50 GPM (varies by configuration; standard Husky 1050 AL is 50 GPM)
• Maximum fluid working pressure: 125 psi (8.6 bar, 0.86 MPa)
• Antifreeze, detergents, motor oil, hydraulic fluid, cutting oil, water, wastewater transfer
• Stall-free low pulsation air valve for smooth and rapid changeover
• Robust construction for industrial environments
• Easy maintenance and serviceability
• Handles solids up to 1/8 inch (3.2 mm)
• Maximum cycle rate: 280 CPM
• Maximum suction lift: 16 ft (4.9 m) dry, 29 ft (8.8 m) wet

Applications:
Industrial fluid transfer, including water, antifreeze, detergents, motor oil, hydraulic fluid, cutting oil, and wastewater transfer

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, reliability, and compatibility with GRACO equipment.
• Ensure proper alignment of pump components during installation
• Use appropriate thread sealant for NPT connections
• Verify air supply is clean and within specified pressure range
• Check for leaks after installation and during initial operation
• Follow manufacturer-recommended maintenance intervals for diaphragm and seat inspection