The Husky 1050 SS is a stainless steel air-operated double diaphragm pump designed for industrial fluid transfer. It is constructed from stainless steel for enhanced corrosion resistance and is intended for use in demanding environments where reliability and chemical compatibility are required.

Key Features:

• Air-operated double diaphragm pump
• Husky 1050 SS, 1 in. (25.4 mm) NPT
• Stainless steel
• Maximum free flow delivery: 189 L/min (50 gpm)
• Maximum fluid working pressure: 125 psi (8.6 bar, 0.86 MPa)
• Compatible with a wide range of industrial fluids, including water, wastewater, detergents, oils, and more
• Stall-free, low pulsation air valve for smooth and rapid changeover
• One-piece center section for leak reduction and lower maintenance
• Handles solids up to 3.2 mm (1/8 in)
• Maximum pump speed: 280 cycles per minute
• Maximum suction lift: 4.9 m (16 ft) dry, 8.8 m (29 ft) wet
• Reliable and robust for continuous industrial use

Applications:
Industrial fluid transfer, wastewater, chemical processing, oil and lubricant transfer, and other applications requiring robust, corrosion-resistant pumping solutions.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, reliability, and compatibility with existing equipment.
• Ensure proper alignment of inlet and outlet connections
• Use appropriate thread sealant for NPT connections
• Check for leaks after installation
• Follow manufacturer guidelines for air supply and pressure settings
• Regularly inspect diaphragms and seals for wear
• Periodically check and replace diaphragms as needed
• Inspect O-rings and seals for wear or damage
• Clean pump internals if handling abrasive or viscous fluids
• Lubricate moving parts according to manufacturer recommendations