The GRACO M07LN0 is an air motor designed for use in high-performance finishing and coating pumps. It is constructed for professional use in both hazardous and non-hazardous locations. The part is engineered for reliability and low noise operation, and is compatible with DataTrak systems for cycle counting.

Key Features:

• Air Motor
• M07LN0, 700 cc displacement, 4.5 in piston diameter, 2.5 in stroke
• Maximum working pressure: 100 psi (0.7 MPa, 7.0 bar)
• Compatible with DataTrak with Cycle Count and Runaway Protection
• Low noise operation
• Designed for high performance and reliability
• Compatible with advanced monitoring systems (DataTrak)
• Engineered for professional use in demanding environments

Applications:
Used in high-performance finishing and coating pumps for industrial applications, suitable for both hazardous and non-hazardous locations.

Installation Notes:

• Using genuine GRACO parts ensures optimal performance, safety, and compatibility with GRACO equipment.
• Install an air regulator close to the pump to adjust air pressure to the motor and fluid outlet pressure
• Install a gauge to read air pressure
• Do not operate the air motor without a plumbed exhaust line or muffler installed
• Torque for M07xxx series: 25–30 ft-lb (34–40 N•m)
• Apply lubricant as specified in the manual
• Regularly check and maintain air pressure and lubrication
• Follow all safety instructions in the manual
• Use only recommended replacement parts